2.5K*16Bit OTP ROM

4*18 LCD Driver

16 I/O


CSU8RP1182 is an 8-bit CMOS single-chip MCU. It embeds 24-bit ADC , low-noise amplifier, and LCD drive. And the system calibration data can be writen to the OTP within the normal working voltage (3.3±0.1V).

The CSU8RP1182 is also highly integrated to reduce BOM cost, only 7 capacitors are required body scales solution.

8 bit RISC Core

8 bit RISC Core, and high efficiency C compiler

2.5K x 16-bit OTP program memory

256-byte data memory (SRAM)

Only 39 single-word instructions

8-level PC storage stack


Built-in 1MHz / 4MHz oscillator

32768 Hz external oscillator (RTC) or 4 MHz to 16 MHz oscillator

Peripheral Features

16 bidirectional I/O ports

10 extensible output port

1 buzzer output

2 external interrupts

4*18 LCD drives

Low-voltage detection (LVD) pin, 2.4V / 2.5V / 2.6V / 2.7V / 2.8V / 3.6V voltage provided internally for comparison

Built-in low voltage programming circuit for OTP

Analog Features

Integrated 24-bit ADC:

— The effectively precision reaches 19 bits(when the PGA gain is 8, the output rate is 32Hz)

— 2 full differential analog input

Integrated programmable gain amplifier (PGA): 8/64/128/256

The output rate of ADC is in the range 3.8Hz to 16KHz

Providing a charge pump inside (2.6 V, 2.8 V, 3.0 V, or 3.2 V)

Providing a voltage stabilizer for the senor and modulator inside

Built-in temperature sensor

Special Features

Power-on reset (POR)

POR and hardware reset delay timer (158 ms)

Low voltage reset (LVR)

Timer 0 — 8-bit timing counter supporting programming and pre-frequency division

Extended watchdog timer (32K WDT) — Programmable time range

Low Power Consumption

Operating current of MCU

— 1mA @ 1MHz, 3.3V in normal mode

— 2mA @ 4MHz, 3.3V in normal mode

— Current in sleep mode lower than 3 μA (startup Bandgap, LDO, and WDT are enabled)

CMOS Technology

Operating voltage:

— DVDD 2.4 V to 3.6 V

— AVDD 2.4 V to 3.6 V


Electronic weighing instruments

Precision measurement and control system

  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
Submit complete information can be approved faster. We will reply within 2 working days. Please note that you need to pay for the freight.